13
10.2.2 In the case of power outage
The door cannot be opened automatically if there is a power outage. It is available to be opened manually
as follows.
（
1
）
Ensure if the rotor has stopped rotating.
z
Listen carefully to ensure no rotating sound can be heard.
（
2
）
Insert a screw driver into a hole to open door.
z
Holes are located on the left and right sides of the unit.
z
Insert a screw driver into the two holes and push forward to release the door.
11. Instructions for the rotor and tubes
CAUTION
z
Read the instructions thoroughly, to properly load and use rotor.
z
Do not exceed the allowable maximum speed of rotor
、
tube and adapters etc. Ensure the allowable
maximum speed of adapters is lower than the rotor’s maximum speed.
11.1 Rotor instructions
11.1.1 Rotor structure
Figure 11-1 The rotor structure
adapter mat adapter screw nut rubber cap
Rotor body mat Spindle hole
