28
/57
4.3.8 PROGRAM CYCLE (
CFG
>>
PROG
)
This is the Program Cycle:
Program cycle
This cycle allows you to set the parameters for creating and editing programs. For more information about programs, such as limits,
examples, and related functions, see
chapter.
PR.ty
Program type
Allows you to define the program
type:
NONE
– Does not use any
program
RAte
– Ramp and soak
PROG
– Ramp and soak programs
rATE
Rate
Allows you to set the Setpoint evolution rate (in degrees per
minute). Available only for Ramp and Soak mode (
RAte
).
T SP
Time Setpoint
Allows you to set the time for a soak following the initial
ramp. Available only for Ramp and Soak mode (
RAte
).
Pr.tb
Program time
base
Program time base. Allows you to set the program time base:
MM
:
SS
– Time base in minutes:seconds
HH
:
MM
– Time base in hours:minutes
