SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
5
SeT-UP & InSTallaTIon
Placement of Cardiovascular Machine
To aid in the placement of the machine, two wheels are
located at the front of the unit. movement of machine
should be done with two people. Carefully lift the rear of
unit until wheels are engaged with the floor, then position
the unit in the desired location.
Position the unit in a location that has a stable and level
sub-floor. equipment should be positioned in a location that
is not in direct sunlight, in areas of extreme temperature
and humidity, or where the equipment may be splashed
with water or fluids. This machine is intended for indoor
use only.
equipment should be positioned with a safety perimeter of
40” or 1 meter around unit.
Level Cardiovascular Machine
If the sub-floor is unlevel, the unit is equipped with leveling
end caps. The endcaps are designed with the recess of end
cap off centered. This allows you to rotate the endcaps to
a position that will level the machine. after adjustment,
check and make sure the end caps are fully seated against
base frame tubes.
WARNINg
Failure to place the equipment on a stable and level
sub-floor with a safety perimeter can result in injury to
yourself and others.
Proper Supervision
Close supervision is required when the exercise machine
is being used by or near individuals with disabilities. Keep
unsupervised children outside the safety perimeter.
Cleaning
never clean the machine with organic solvents, alcohol or
bleach based cleaners. To promote a healthy environment,
wipe any sweat off of unit with a commercially manufactured
wipe designed for the fitness industry, or a damp cloth.
40” (1 m)
Safety Space
endcap
endcap
40” / 1 meter
Safety Space
offset endcap
40” (1m)
Safety Space
40” (1 m)
Safety Space