Scientific SMO1002 страница 13 Скачать руководство пользователя

Страница: 13 / 102

Operating Instructions

General Information

The logical front panel layout of SMO Series Digital Oscilloscope ensures rapid familiarization with the

various functions. However, even experienced operators should not neglect to carefully read the

following instructions, to avoid any operational errors & to be fully acquainted with the instrument when

later in use.

After unpacking the instrument, check for any mechanical damage or loose parts inside. Should there be

any transportation damage, inform the supplier immediately & do not put the instrument into

operation.

Safety

The case chassis & all measuring terminals are connected to the protective earth contact. The mains plug

shall only be inserted in a socket outlet provided with a protective earth contact. The protective action must

not be negated by the use of an extension cord without a protective conductor. Warning!

Any interruption of the protective conductor inside or outside the instrument or disconnection of the

protective earth terminal is likely to make the instrument dangerous. Intentional interruption is

prohibited. The mains/ line plug should be inserted before connections are made to measuring circuits.

When removing or replacing the metal case, the instrument must be completely disconnected from the

mains supply. If any measurement or calibration procedures are unavoidable on the opened-up

instrument, these must only be carried out by qualified personnel acquainted with the danger involved.

Operating Conditions

The ambient temperature range during operation should be b 0

to + 40

C RH 90% & should

not exceed -40

C or +70

C during

transport or storage. The operational position is optional. Prior to

calibration a warm-up time of approx 30 minutes is required.

First Time Operation

After unpacking the instrument check for mechanical damages. The instrument should be plugged in

mains-plug of proper main supply 230 V ± 10%. ON switch no undue observation should be noticed. Once

the instrument is switched “ON”, the power “ON” is indicated by litting of display .

Function Checking

When you check whether or not the oscilloscope could work smoothly, please operate as following:

1. Power On the oscilloscope

Press “DEFAULT SETUP” to show the result of the self check. The probe default attenuation is 1X.

User Manual SMO702, SMO1002

Fig. 4A

Содержание SMO1002







































































































Результаты поиска

Содержание SMO1002

Отзывы:

Похожие инструкции для SMO1002

Бренды по названию

Популярные бренды

Scientific SMO1002, Руководство пользователя

Результаты поиска

Содержание SMO1002

Отзывы:

Похожие инструкции для SMO1002

Бренды по названию

Популярные бренды