Scientific SMG2000 Series, Руководство пользователя

Страница: 32 / 150

Scientific
32/150 User manual SMG2000
2.4 To Set Pulse Signal
Press Waveforms key to call the wave operation, and press the Pulse softkey.
The pulse waveform parameters are set by using the pulse operation menu.
The parameters for pulse waveforms include frequency/period, amplitude/high
level, offset/low level, width, rise/fall and delay. As shown in Figure 2-10, in the
soft key menu, select PulWidth. The pulse width parameter area is highlighted
in the parameter display window, and users can set the pulse width value
here.
Figure 2-10 Pulse Parameters Display Interface
Table 2-4 Menu Explanations of Pulse Waveform
Function
Menu
Settings Explanation
Frequency/
Period Set the signal frequency or period;
The current parameter will be switched at a second press.
Amplitude/
HighLevel
Set the signal amplitude or high level;
The current parameter will be switched at a second press.
Offset/
LowLevel Set the signal offset or low level;
The current parameter will be switched at a second press.
PulWidth/
Duty Set the signal pulse width or duty
The current parameter will be switched at a second press.
Rise/
Fall Setting the rise edge or fall edge for pulse waveform.
The current parameter will be switched at a second press.
Delay Setting the delay for pulse waveform.