OL
(LED): LED Indicators for respective power supplies
indicating Overload.
“
C
”
banana terminals: Output terminals of 15 volt DC power supply.
20
21 23 25
Adjusting knob
: Rotary knob to set the output of 15 V Variable DC power
supply from 2 V to 15 V.
22
Adjusting knob
: Rotary knob to set the output of 15 V Variable DC power
supply from 2 V to 15 V.
24
Adjusting knob
: Rotary knob to set the output of 5 V Variable DC power
supply from 4.5 V to 5.5 V.
27
26
Amplitude
(adjusting knob) : Continuous adjustment of the output
amplitude from 0 to - 20 dB.
28
Offset
(adjusting knob) : Adjustment of the positive or negative offset
voltage. This DC voltage can be superimposed on the output signal. The
max. offset voltage is ± 5 V (o.c.) or ± 2.5 V respectively when terminated
with 50 W .
Frequency
(2 push buttons) : Frequency range selection from 0.3 Hz to
3 MHz in 7 decade steps.
29
Digital Display
(7-segment LED) : 5-digit frequency counter. LED
indicators for Hz and kHz.
30
Pushbutton for switching the power supply
among A, B or C .
Push Button A ,
B & C :
31
Digital Display
(7-segment LED) : Each 3-digit LED display for displaying
voltage & current.(SM5076-1)
32
AC Mains
Fuse
: Mains input for Function Generator , 230V
10% , 50 Hz,
: Mains Fuse , a spare fuse is kept inside.
+
33
TRIG OUT
(BNC output) : Trigger output, synchronous to the Function
Generator output is available.
34
FM IN
(Input BNC) : Terminal for input for Frequency modulation.
35
10
User Manual
5076 / SM5076-1
SM
Rear Panel Controls
TRIG OUT
FM IN
S No. XXXXXXXX
33
35
34
Scientific Mes- Technik Pvt. Ltd.
B- 14, Pologround Industrial Estate
Indore 452015, India
Power : 230 V, 50 Hz
Fuse : 0.35 A, time lag, 5x20 mm
SM5076
