Scientific Atlanta Continuum DVP eXtra Dense QAM Array, Системное руководство

Страница: 26 / 112

Continuum DVP eXtra Dense QAM Array Housing,
Continued
LED Indicators
The following table describes the LED indicators on the front panel.
Label Type Description
Red Indicates a pending alarm or error detected
by the processor. ALARM
Green Status OK
Red The main power supply is inactive.
Green Illuminates if the main power supply is
active.
MAIN
Extinguished No main power supply is available.
Red The backup power supply is inactive.
Green Illuminates if the backup power supply is
active.
BACKUP
Extinguished No backup power supply is available.
Connectors
The following table describes the connectors on the rear panel.
Label Type Description
RF OUT 1 - 6 F RF output
GbE 1-2 RJ-45 (electrical)
SFP (optical) IP input
Ethernet 10BT RJ-45 10Base-T Ethernet port to set the IP address
of both ports and to manage the device
Ethernet
10/100BT RJ-45 10/100Base-T Ethernet port to manage the
device
Additional Information
For more information about the Continuum DVP eXtra Dense QAM Array housing
specifications, see Appendix A,
Technical Specifications .
1-6 Describing the Continuum DVP eXtra Dense QAM Array 4004949 Rev C