Scientific Atlanta Continuum DVP eXtra Dense QAM Array, Системное руководство

Страница: 13 / 112

Important Safety Instructions,
Continued
Lithium Battery
For equipment with a lithium battery, observe the following rules:
•
Do not dispose of used batteries through the regular garbage collection system, but follow
the local regulations. The batteries may contain substances that could be harmful to the
environment.
•
Replace batteries with the same or equivalent type recommended by Scientific-Atlanta.
•
Insert batteries correctly. There may be a risk of explosion if the batteries are incorrectly
inserted.
•
When disposing of this equipment, remove the batteries and dispose of them separately in
accordance with local regulations.
•
Do not recharge the batteries or expose them to temperatures above 100°C (212°F).
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Electromagnetic Compatibility Regulatory Requirements
This equipment meets applicable electromagnetic compatibility (EMC) regulatory
requirements. Refer to this equipment’s data sheet for details about regulatory compliance
approvals. EMC performance is dependent upon the use of correctly shielded cables of good
quality for all external connections, except the power source, when installing this equipment.
•
Ensure compliance with cable/connector specifications and associated installation
instructions where given elsewhere in this manual.
Otherwise, comply with the following good practices:
•
Multi-conductor cables should be of single-braided, shielded type and have conductive
connector bodies and backshells with cable clamps that are conductively bonded to the
backshell and capable of making 360° connection to the cable shielding. Exceptions from
this general rule will be clearly stated in
the
connector description for the excepted
connector in question.
•
Ethernet cables should be of single-shielded or double-shielded type.
•
Coaxial cables should be of the double-braided shielded type.
EMC
Where this equipment is subject to USA FCC and/or Industry Canada rules, the following
statements apply:
Continued on next page
4004949 Rev C xi