8
CONTROL PANEL & OPERATIONS
13.
On/Off Key.
After powering on, the LED display shows
10:00
, which is the initial
default time (as shown), and the unit is ready with the normal working status. Press
On/Off key twice and the cleaning starts. The cleaning stops when the timer counts
down to
00:00
. If the unit needs to be stopped before the timer runs out, press
On/Off key twice.
To prevent accidentally turning on or off the unit, the On/Off key needs to be touched within
6 seconds to turn it on or off. flashes, indicating the unit is running under Normal Cleaning
mode.
14.
Decreasing Key.
a. When Time is used, pressing the button each time reduces the timer buy 1 minute.
b. When Temp is used, pressing the button each time reduces the set temp. down to the
next level.
c. When h/min is used, pressing the button each time reduces the solution set time by 20
minutes.
15.
[ ] h/min – Solution Usage Timer Set Key
. Each time that [ ] key is pressed, the timer is
increased by 20 minutes. For example,
01:20
indicate that the solution is set to be used for 1
hour and 20 minutes. The maximum time that can be set is 10 hours.
16.
Temperature Set Key.
5 set temperatures (ºC/ºF) can be selected. Press Temp button to
select the temperature in the following sequence:
17.
Timer Quick Set Key.
Press Time key, LED display shows
10:00
. Each press increases the
time by 5 minutes.
SD-485 US EN R1_StatClean user manual.indd 8
2016-06-09 12:58 PM