Schwinn Journey 8.5 870 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 54

Schwinn Journey 8.5 870 Скачать руководство пользователя страница 51

51

Condition/Problem

Things to Check

Solution

Fan will not turn on or will
not turn off

Reset machine

Unplug unit from electrical outlet for 5 minutes. Reconnect to
outlet.

Fan will not turn on, but
Console operates

Check for blockage of fan

Unplug unit from electrical outlet for 5 minutes. Remove material
from fan. If necessary, detach the Console to help with removal.
Replace the Console if unable to remove blockage.

Unit rocks/does not sit
level

Check leveler adjustment

Adjust levelers until machine is level.

Check surface under unit

Adjustment may not be able to compensate for extremely uneven
surfaces. Move machine to level area.

Thumping sound when belt
operates

Walking belt

Walking belt needs to be used for wear in period. Sound will go
away after the wear in period.

Walking belt not aligned

Machine leveling

Make sure the machine is level. Refer to the procedure for level-
ing the machine in this manual.

Walking belt tension and
alignment

Make sure the walking belt is centered and tension is correct.
Refer to the procedures for adjusting tension and aligning the belt
in this manual.

Motor sounds strained

Silicone lubrication on
walking belt

Apply silicone to the inner surface of the walking belt. Refer to
the belt lubrication procedure in this manual.

Hesitation or walking belt
slips when in use

Belt tension

Adjust the belt tension at the rear of the machine. Refer to the
procedure for adjusting belt tension in this manual.

Belt stops moving while in
use

Safety key

Plug Safety Key into Console. (See Emergency Stop Procedure
in the Important Safety Instructions section.)

Motor overload

Unit may be overloaded and draw too much current, which
causes power to turn off to protect motor. Refer to maintenance
schedule for belt lubrication. Make sure the walking belt tension
is correct, and start unit again.
If the above steps do not resolve the problem, contact Customer
Care for further assistance.

«
...
49
50
51
52
53
...
»

Содержание Journey 8.5 870























































Отзывы:

Нет отзывов