Schwinn 510T Скачать руководство пользователя страница 69

Страница: 69 / 147

13. Make sure there is no object on or around the treadmill to spill or cause blockage from the fully unfolded

position.

14. Slightly push the walking deck forward toward the console. With your

foot lightly push the top part of the hydraulic lift forward until the locking tube

releases and you can pull the walking deck away from the console. Hold up the

rear of the walking deck, and move to the side of the machine.

Keep clear of the movement path of the walking deck.

15. The hydraulic lift is set up to drop gradually. Hold onto the walking deck

until approximately 2/3 of the movement down. Lower the weight with your

legs. Be aware that the walking deck can possibly drop quickly in the last part

of the movement.

16. Re-install all remaining parts that were removed in reverse order.

17. Attach the power cord and turn on the Treadmill by flipping the power switch to ON.

18. From the Power Up (or Welcome) screen, push and hold down the PAUSE/STOP button and Down arrow button for about 5 seconds to go into

the Machine Setting Mode. The Console display will show the TOTAL HOURS screen.

19. Push and hold down the PAUSE/STOP button and Down arrow button for about 5 seconds to go into the Engineering Mode.

20. Push the Down arrow button 12 times until the Console displays “ENTR MCB CLB”.

Be sure the area around the Treadmill is clear of all bystanders, children and pets. Be sure there is nothing on or under the Walking

Belt, or near the Treadmill.

21. The Console will display “MCB CALIB”.

22. With the area clear, push the ENTER button. The calibration procedure will begin by automatically moving the Walking Belt.

Be sure not to touch or allow anyone else to touch the machine while calibration is occurring.

23. When calibration is complete, the Console will display “DONE”.

24. Push the PAUSE/STOP button to exit the Engineering Mode.

25. Flip the power switch to OFF. Calibration is now complete for the machine.

26. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s

Manual.

Содержание 510T




















































































































































Результаты поиска

Содержание 510T

Отзывы:

Похожие инструкции для 510T

Бренды по названию

Популярные бренды

Schwinn 510T, Руководство по обслуживанию

Результаты поиска

Содержание 510T

Отзывы:

Похожие инструкции для 510T

Бренды по названию

Популярные бренды