136
14. Make sure there is sufficient space to lower the walking deck.
Keep a minimum clearance behind the machine of 79” (2 m)
and 24” (0.6 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
15. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
16. Slightly push the walking deck forward toward the console. With your
foot lightly push the top part of the hydraulic lift forward until the locking
tube releases and you can pull the walking deck away from the console.
Hold up the rear of the walking deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
17. The hydraulic lift is set up to drop gradually. Hold onto the walking
deck until approximately 2/3 of the movement down. Lower the weight
with your legs. Be aware that the walking deck can possibly drop quickly
in the last part of the movement.
18.
Be sure to observe the distance from the Speed Sensor to the Drive
Pulley. This distance affects the effectiveness of the Speed Sensor, and
can easily be shifted accidentally during replacement procedures.
19. Using a 6mm hex wrench, remove the indicated screw from the Front
Roller.
Drive Belt
Speed
Sensor
Drive Pulley
Front Roller
