S
ervice Manual
Remote Control Cable/Radio
557
•
Always operate the machine gently and with-
out force!
•
Never change of your own values set or speci-
fied by the manufacturer, such as hydraulic oil
pressures, tightening torques, etc.!
•
Carry out all the prescribed maintenance and
inspection work completely and punctually!
•
Use only lubricants and operating supplies
according to our recommendations!
•
During operation, regularly read all the built-in
monitoring instruments and note any unusual reac-
tions (noises, lack of power, etc.)!
•
Install only ORIGINAL SCHWING SPARES!
During operation and maintenance work, the rele-
vant safety regulations must be strictly observed.
(Note the extract from the terms of warranty.)
In the event of failure, possible queries, and for
ordering spare parts, please contact:
Schwing America, Inc.
5900 Centerville Road
White Bear, MN 55110
(651) 429-0999
TWX: 910-563-3539
Subsidiary of: Friedrich Wilh. Schwing GmbH
or the authorized representative for your area.
Always quote the machine model, the serial num-
ber, and the information on the model plates.
Carry out operation and maintenance of the chas-
sis and the engine installed according to the
maker’s instructions.
4. Extract from the Terms of
Warranty
The following extract from the terms of warranty
deals with those damages which may result from
incorrect operation and maintenance:
The warranty does not extend
a. to defects arising in consequences of natural
wear and tear, inadequate installation and erec-
tion work by third parties, inadequate commis-
sioning, inadequate or negligent handling,
subjection to unsuitable stresses and loadings;
b. to defects caused by modifications or repair
work carried out by the purchaser or by third
parties without our prior approval.
c. to defects arising due to the installation of
spare parts which are not genuine SCHWING
parts.
If a defective machine continues to be used in spite
of the defect, the warranty shall be confined only
to the original defect.
**Complete terms of warranty, see section 7 of the
General Trading Terms.
When exporting our machines, special regulations
possibly in force in the destination country must
be complied with.
*Any export of SCHWING machines without
authorization from SCHWING is not allowed.
Appropriate Applications
The machine is assigned exclusively to the appli-
cation purposes mentioned in these operating
instructions.
The company of Schwing will not be liable for
damages, if
•
the machine is used for operations which are
not the normal practice.
•
the operation instructions, the safety regula-
tions, and the accident prevention regulations are
not observed.
Home
