Schweitzer Engineering Laboratories SEL-2890 Скачать руководство пользователя | Manualshive

Страница: 70 / 86

background image

SEL-2890 Instruction Manual

Date Code 20210715

HTML Code

C.4

The HTTP files are stored in two different memory areas in the SEL-2890. Each
memory area has a maximum size of 230 kilobytes. The following table shows which
HTTP files are grouped together.

Table C.1

Callout Numbers in Figure C.1

Callout #

Description

1

The HTTP is set to start with the index.htm file. This file contains the
<HEAD><TITLE> information and sets the character of the three frames.

2

This code places the logo on the main frameset and references the logo.htm
file. The logo.htm file contains display information about the logo.

3

This code places the menu on the main frameset and references the menu.htm
file. The menu.htm file contains the tree structured applet.

4

This code places the data display on the main frameset and references the
data.htm file. Data.htm contains the selection for the background color.

5

The access.htm file is run by selecting Access/Login from the menu tree in the
HTTP. The file, access.htm, provides a form that allows you to gain Level 1
access to a relay via a password.

6

This is ICON1 (icon #1) which is referenced later on in the nodelist.txt file.
ICON1 is the folder that appears to be open.

7

This is ICON2 (referenced in nodelist.txt). ICON2 is the document icon that is
located under the folder icon.

8

This is ICON4 (referenced in nodelist.txt). ICON4 is the link graphic that con-
nects a folder icon to a document icon.

9

Message that will appear if Java is not activated in the browser.

10

This is ICON0 (referenced in nodelist.txt). ICON0 is the closed folder graphic.

11

A supporting text file, nodelist.txt, is used by the tree structure applet. This text
file contains the information needed to create the node name, structure, and
commands that are sent to the relays or communications processors. The com-
plete explanation about the parameters needed by the Alitree applet is con-
tained in the file alitree.zip located in the SEL-2890. Only part of the
nodelist.txt file is shown above. You may FTP the Nodelist.txt file out of the
SEL folder in the transceiver to view its contents. For more information, please
contact SEL.

12

Use the ! symbol to set the Status Bar text to match the label associated with the
tree item.

Table C.2

HTTP Files

(Sheet 1 of 2)

Memory Area 1

Memory Area 2

File

Directory

File

Directory

logo.jpg

User

page4.htm

Custom

nodelist.txt

User

page5.htm

Custom

index.htm

Custom

page6.htm

Custom

«
...
68
69
70
71
72
...
»

Содержание SEL-2890























































































Отзывы:

Нет отзывов

Похожие инструкции для SEL-2890

Бренд: RadioMaster Страницы: 3

Бренд: WDS Страницы: 32

Бренд: Yamaha Страницы: 8

Бренд: Yaesu Страницы: 5

Бренд: SOMFY Страницы: 24

AERASGARD KCO2-SD-TYR2

Бренд: S+S Regeltechnik Страницы: 16

Бренд: OMFB Страницы: 9

Бренд: XM Satellite Radio Страницы: 2

Campersat Autoseek Autoskew System 4441

Бренд: Campersat Страницы: 14

978 UAT/1090 ES

Бренд: SkyGuardTWX Страницы: 2

Бренд: Topfield Страницы: 46

Бренд: Ocean Signal Страницы: 28

Wireless A/V Sender 2.4GHz

Бренд: Quatech Страницы: 8

Бренд: Hammarlund Страницы: 81

Бренд: Clas Ohlson Страницы: 4

Бренд: Icom Страницы: 68

Бренд: ICP DAS USA Страницы: 8

Бренд: Vanderbilt Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды