Schweigen WM-EX90S, Руководство по установке

Страница: 11 / 28

Page 11
5. Cleaning & Maintenance
Replacing the Lights
Danger
Always switch off and disconnect power before replacing the lights. Failure to do so may
cause serious injury. Please be aware that the light bulb may retain heat for a short period
of time after being switched off.
Step 2
Unplug the red and black wires by
pushing the clips (A) and pulling
the cord.
Step 3
Push the 2 clips on the side of
the light (B) and gently push
down. The light will then come
out
Step 4
Insert the new light by pushing
into the cavity into the light clips
in. Plug in the red and black wires
into their respective slots
Step 5
Replace the filters and close the
perimiter aspiration door.
Step 1
Open the Perimiter aspiration
door and remove the filters..
A
B