Cleaning & Maintenance
D A N G E R
Always switch off and disconnect the power cord before replacing any lights. Failure
to do so may cause serious injury. Please be aware that the LED light will retain heat
for a short period of time after being switched off. Never attempt to replace the LED
by yourself, always refer to a qualified Service Technician.
R E P L A C I N G T H E L E D L I G H T
STEP 1
Remove filters from rangehood.
STEP 3
From inside the cavity, push down on the light
until it pops out.
STEP 2
Unscrew and remove the internal panel.
STEP 4
Unclip the cord by pushing in the side clips
and pulling the cord.
11
MSQX90
Rangehood & Installation Guide
