Page 11
>>
OPERATION
CONNECTING AND SETTING APPLIANCE
Select heating
functions
Fan assisted
heating
SETTING THE TIME
When you plug in the appliance for the first time (or
after a power outage) you need to set the current
time. Current time is flashing on the display.
• Selecting 12h or 24h time format.
You can use , sensors and (OK). Touch OK to
initiate standby mode.
• Selecting the time, 11:27 AM for example.
You can use , sensors and (OK). Touch OK to
initiate standby mode.
IMPORTANT
In the event of a power outage all automatic
programmes, set temperatures and kitchen timer
are cleared. If you interrupt the pyrolytic cleaning
(or the door is locked for any other reason), the
oven will start the cooling and door opening
procedure before you can set the time again.
STANDBY MODE
The oven is in standby mode when it is “OFF”. In
this mode, the power consumption of the appliance
is limited to 800mW (except when cooling down
or using the light). You can turn the oven off by
pressing the
Select heating
functions
Fan assisted
heating
sensor.
All heating elements will disconnect and the display
is dimmed except for the clock.
If you touch sensors in a standby mode, there will
be no confirmation.
From 10pm to 6am in standby the display backlight
is reduced as set for night-time mode.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
