44
Powerline Adapter
Adding a Wireless computers to the AP/Router with WPS Button
This is the easiest way to establish a connection to the AP. First, check whether
your end device supports WPS. For further details, please read the operating in-
structions for your end device.
1. Log on to the computer.
2. Press the WPS button on the AP/Router for
3
seconds. The WIFI/WPS LED now
flashes for approx. 2 minutes.
3. Within these 2 minutes, please press the connection button (WPS) on your end
device. (For further details, please read the operating instructions for your end
device.)
Your end device then automatically connects to your AP/Router and applies all of
the settings. You should see icons for the computer you added and for the other
computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the AP/Router
1. Plug the AP/Router to a socket. Connect your computer / laptop with the AP/
Router with enclosed RJ45 Cable.
2. To Confirm that you added the computer, do the following:
Open Network by clicking the
Start
button, and then clicking
Control Panel
.
In the search box, type
network
, and then, under Network and Sharing Center,
click
View network computers and devices
. You should see icons for the
computer you added and for the other computers and devices that are part of
the network.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-orcomputer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-awireless-network
