4.3 Rear Panel Connections
1
DC power input (12 V, 1 A)
4
SCART Connector (TV)
2
AC Adaptor
5 Antenna Loop-Through Output
3
RS-232 Data Interface
6
VHF / UHF Terrestrial Antenna Input
7. Optional Cable: Car Cigarette Lighter Power cable (Use 12V DC Only) & Remote Eye Cable
1
DC power input (12 V, 1 A)
This connector is designed for plugging in the DC power cable of the AC adaptor as well as any
other suitable DC power source. Please observe polarity: CENTER PLUS.
2
AC Adaptor
This adaptor comes with the unit and may look different in some cases or areas.
It will provide adequate 12 volts DC power for this unit. Please plug the DC cable into the "DC
power input" jack (1) of this unit.
3
RS-232 Data Interface
Computer interface for service stations and advanced users only. To be used for software update
and channel list data transfer from another receiver (master / slave).
4
SCART Connector (TV)
For connection of all audio and video signals of this digital receiver to the TV set.
5
Antenna Loop-Through Output
If you have another analogue or digital receiver and you wish to use the same antenna, then you
can connect it to this "antenna loop-through" output jack (ANT OUT).
6
VHF / UHF Terrestrial Antenna Input
Connect your antenna to this input jack (ANT IN). For so-called "active" antenna systems a
suitable power supply can be provided from through jack (to be selected in the "General Settings"
menu, item "Antenna Booster Power")
7. Optional Cable: Car Cigarette Lighter Power cable (Use 12V DC Only) & Remote Eye Cable
5. Getting Started
CAUTION:
Do not mix up
ANT IN
und
ANT OUT
jacks when
connecting your antenna system.