9. Advanced Operation
In this section some operations are described that do not necessarily belong to the basic functions of
this unit and they need not to be carried out for normal TV viewing. However, from time to time it may
become necessary to use one of these functions.
9.1 Auto Search Function
When you set up your receiver for the first time, an "Auto Search"
process will start automatically. If it should fail for some reasons or
you wish to search for new TV channels, please follow the steps
listed below.
•
Select “Auto Search” in the "Channel Manager" menu and
then press the OK button.
•
TV (and radio broadcast channels, if available) will be
searched.
•
The names of the found channels will be listed.
•
After the search process has been finished, the unit automatically turns to normal TV viewing
mode.
9.2 Manual Search Function
Use this channel search by entering the multiplex information
manually to the receiver. This channel search is often used to
search for a particular channel or those channels that "Auto Search"
has missed, but it requires comparatively more expertise.
•
Select “Manual Search” and then press the OK button.
•
Select the multiplexes (TV channel packages) you want to
search, using the
(Up/Down) buttons and OK.
•
After the settings are completed, press the RED button to
start "Manual Search".
•
The names of the found channels will be listed.
•
After the search process has been finished, the unit automatically turns to normal TV viewing
mode.
9.3 Delete Channels from Total List
When performing an "Automatic Search" also some unwanted channels may be caught. To delete
individual channels from the "Total List" :
•
Go to "Favorite List Manager" and select "Remove Channels of Total List".
•
Select unwanted channel(s) with the
(Up/Down) buttons and OK.
•
Shift selected channel(s) into the trash can "Recycled", using the
(Right) button.
•
Press GREEN button to move to the trash can "Recycled".
•
Press OK to shift back channels from trash can to the "Total List", if needed.
•
Press EXIT to delete all channels from the trash can. A warning message appears. Press OK
for delete, press EXIT to cancel the delete process.
9.4 Delete all Channels
This function will delete all channel data from the receiver. All other individual settings will be kept.