USER GUIDE
18
ON, OFF, AND STANDBY MODES
SWITCHING ON
Connect the radio to a suitable power supply, then press the button once to activate standby mode and again
to switch the unit on.
SWITCHING OFF
Keep the button pressed to turn the radio off, or briefly press it once to return to standby mode.
FEATURES
FIRST USE
Unpack the unit and connect it to a suitable power source using the adapter supplied, or insert four C batteries
into the compartment on the back. Extend the antenna fully. Press the button once to activate standby mode,
and again to switch on the radio.
The date and time are automatically set when the radio receives a signal, and it will then carry out an initial
scan.
The figure on the right of the display is the number of channels found in your area.
The radio will then tune to the first station available in DAB mode in alphabetical order.
CONTROLS
USING THE BUTTONS
Unless otherwise instructed, press the buttons only briefly when selecting functions.
USING THE KNOBS
These serve two purposes: turn them to scroll through the available options, and press them to select an action.