schwa-medico OPErATING MANuAL - EMP 4 ECO+
42
By keeping the intensity keys pressed, the intensity will increase/
decrease more rapidly. The intensity of each channel is displayed on
the screen. The intensity can be set between 0 and 100 mA.
Caution!
The stimulator automatically locks the intensity to the
set level after 5 seconds. To adjust the intensity you firstly need to
decrease the intensity. The intensity can then be increased again.
If electrodes are not or not correctly connected to the stimulator, you
will not be able to set the intensity to more than 10 mA. The same
result will occur if electrodes are old or the cables broken.
Stopping the Stimulation
You can stop the stimulation at any time by pressing the
P
key or
the key for 2 seconds. When the therapy time is completed, the
stimulation stops automatically.
Pausing the Stimulation
You can temporarily stop the stimulation by pressing the
E
key during
the stimulation. The word “PAUSE” then flashes on the display. You
can then adjust the position of the electrodes. Press the E key again to
re-start the stimulation. The intensity levels slowly increase to the level
set before the pause.
Содержание 101060
Страница 34: ...schwa medico Gebrauchsanweisung EMP 4 ECO 34 ...
Страница 69: ...schwa medico Operating Manual EMP 4 ECO 69 ...
