SCHURR SCHURR cow-brush type B00, Руководство по эксплуатации

Страница: 4 / 27

SCHURR cow-brush Type B00/C12
Feb. 2017 Page 4 www.schurr-geraetebau.de
2 Basic safety notes
2.1 Observe notes in the operating instructions

The basic requirement for handling and operating this machine in a safe and error-free manner is the knowledge of
the basic safety notes and the safety regulations.

These operating instructions contain the most important notes for safe operation of the machine.

These operating instructions, in particular the safety notes, must be observed by all personnel operating this machine.

In addition, the rules and regulations applicable to accident prevention at the place of use are to be observed.
2.2 Duties of the person responsible for the machine
The person responsible for the machine is obliged to allow operation of the machine only by those persons who

are familiar with the basic regulations concerning work safety and accident prevention, and are trained in the
handling of the machine
.

have read and understood the safety chapter and warning notes in these operating instructions.
2.3 Duties of the operator
All persons who are to operate the machine are obliged, before commencing work,

to observe the basic regulations concerning work safety and accident prevention

to read and understand the safety chapter and warning notes in these operating instructions.
Schurr-Gerätebau GmbH is available for enquiries where questions remain unanswered.
2.4 Dangers when operating the machine
The machine is constructed according to state of the art technology and recognised technical
safety controls. Nevertheless, the use of the machine can lead to danger to life and limb
for the operator or a third party, or harm to the machine or other material assets.
The machine is only
to be used

for the intended purpose

in a state where technical safety is not compromised.
Failures that can impair safety are to be rectified immediately
.
2.5 Guarantee and liability
In principle, our 'General Conditions of Business' are applicable. These are available to the person responsible for the
machine. If this is not the case, they can be requested.
Any guarantee or liability claim in the event of damage to persons or property is excluded when it can be ascribed to one
or more of the following causes:

Use of the machine for a purpose other than its intended purpose.

Inappropriate installation, commissioning, operation and maintenance of the machine.

Operation of the machine in conditions where safety equipment is defective, or improperly installed or incorrectly
functioning safety and protection equipment.

Disregarding of the notes in the operating instructions dealing with transport,
storage, installation, commissioning, operation and maintenance of the machine.

Unauthorised structural modifications to the machine.

Unauthorised modifications to the machine, e.g. drive ratios - output and rotation speed.

Faulty monitoring of machine parts subject to wear and tear.