SCHURR SCHURR cow-brush type B00 Скачать руководство пользователя страница 3

Страница: 3 / 27

SCHURR cow-brush Type B00/C12

Feb. 2017 Page 3 www.schurr-geraetebau.de

Purpose of document

These operating instructions are designed to make the person responsible for the SCHURR Cow-brush familiar with the

following:



mode of operation



operating



safety

notes



maintenance

Operating personnel

The SCHURR Cow-brush may be operated exclusively by persons who have read and understood the operating instructions

and safety notes.

Additional requirements, qualifications and skills are detailed in each chapter.

Notation used

Keyword

Notation

Meaning

Safety notes

Bold and

cursive

indicate facilities or actions that protect the user and the

environment from damage



Symbol

indicates an action for the operator

(25)

Round brackets

indicate the numbering of a component

Notation used in conjunction with the safety notes is described in

Chapter 2 'Basic safety notes'.

Storage

The operating instructions are to be kept at or near the machine at all times, and must always be at hand.

User feedback

Dear valued customer,

These operating instructions are updated regularly by us. Your suggestions for improvement will help to produce

operating instructions that are more and more user friendly.



2017 Schurr-Gerätebau GmbH, Langer Rain 2, 88524 Uttenweiler/Dentingen, GERMANY

Reprinting, also of portions of this document, only with permission of the company.

Содержание SCHURR cow-brush type B00




























Результаты поиска

Содержание SCHURR cow-brush type B00

Отзывы:

Бренды по названию

Популярные бренды

SCHURR SCHURR cow-brush type B00, Руководство по эксплуатации

Результаты поиска

Содержание SCHURR cow-brush type B00

Отзывы:

Бренды по названию

Популярные бренды