Storage
Monthly: Functional test 30° detent and rotary function
toolholder taper:
1. If there is a toolholder mounting in the tool adapter (2),
remove it.
2. Turn the toolholder mounting until the tool locking mechanism
(2) comes to rest directly over the spring latch for the rotary
lock (3).
3. Pull the spring latch for the rotary lock (3) outward and
continue to turn the toolholder mounting 5° - 10° clockwise in
the tool adapter.
4. Release the spring latch for the rotary lock (3) again.
5. The toolholder taper can still be rotated. Continue turning the
toolholder taper until a total rotation of approx. 30° is reached.
The spring latch must snap in and the rotation is locked.
6. Now repeat steps 3 – 5 and check the grid positions at the total
rotations 0° - 30° - 60° - 90° - 120° - 150° - 180° - 210° - 240° -
270° - 300° - 330° - 360°.
Monthly: Functional check of the torque pin
Perform a test clamping to ensure that the torque pins on the
inside of the tool shank engage securely in the toolholder
mounting.
9 Storage
When not in use, all products must be protected against corrosion
with suitable measures.
These products for industrial applications must be stored under
suitable conditions that are common in mechanical engineering.
39
01.00 | | TOOLFIX modular tool mounting device | en | 1510829
