SCHUNK TANDEM KSP3, Сборка и руководство по эксплуатации

Страница: 30 / 52

Maintenance and care
30 04.00 | KSP3, KSP3-LH, KSP3-F | TANDEM Clamping Block | en | 1463318
Central lubrication
• To use central lubrication, the set-screws of
the factory sealed connections (6, 7) must be
removed.
• For proper lubrication, both supply lines
must be connected.
• The central lubrication system must be
suitable for greases of NLGI 2 classification.
• Only lubricate in the open position.
• After greasing, run through the complete
stroke several times.
• Grease to be used and lubrication
intervals,
}
7.3 [
/
28]
Size Grease quantity (per connection) [cm³]
64 2
100 4
140 4
160 4
200 4
250 4
315 6
7.4.2 Basic cleaning
WARNING
Risk of injury during disassembly of the product because of the
high spring pressure in the cover and the cylinder pistons (AS
variant).
•
Only trained specialist personnel may disassemble the
clamping force block!
•
The cover may only be removed with the aid of a suitable
disassembly device!
For basic cleaning, the product must be disassembled, cleaned and
reassembled. With the "PM" variant, the pneumatic jaw end
position control must also be set.