SCHUNK SRU 10, Инструкция по сборке и эксплуатации

Страница: 23 / 48

Assembly
10.00 | SRU | Assembly and Operating Manual | en | 389439
23
Ø
Screw the product to the machine/system, Mechanical
connection [
}
24].
✓
Use centering sleeves.
✓
Observe the tightening torque for the mounting screws, see
the following table.
Ø
Fasten attachment with two cylindrical pins and two fastening
screws to the pinion,
Mechanical connection [ } 24].
NOTICE! Insert the cylindrical pins by hand. Do not hammer
the pinion.
Ø
In the main air connections "A" and "B", screw in throttle valves
and connect compressed air lines,
Pneumatic connection
[
}
26].
OR with hose-free direct connection:
✓
Mount throttle valves in the supply lines "a" and "b".
✓
Use O-rings from the accessory pack.
Ø
Check that all of the throttle valves are closed.
Ø
Screw in locking screws in open and not required air
connections where appropriate.
Ø
Adjust end positions, Adjustment of the end positions [
}
27].
Ø
Adjust center position if necessary, Adjustment of the central
position (Variant M) [
}
28]
Ø
Mount sensor if necessary, Installing the sensors [
}
29].
Ø
Adjust swiveling speed, Setting the speed [ } 32].
Ø
Adjust shock absorber stroke, Adjustment of the shock absorber
stroke [ } 34].