SCHUNK SGB 32, Сборка и руководство по эксплуатации

Страница: 15 / 20

Assembly
03.02|SGB 32 - 50 |en 15
Sensors
The module is prepared for a number of sensors. Other sensors
can be used with a mounting kit.
• If you require further information on sensor operation, contact
your SCHUNK contact person or download information from
our homepage.
• Technical data for the sensors can be found in the data sheets
(included in the scope of delivery).
IN 40 inductive proximity switch
4
25
Fig. 3
Fig. 4
Types that can be ordered (
☞
catalog):
The inductive proximity switches used are equipped with reverse
polarity protection and are short-circuit-proof.
Make sure that you handle the proximity switches properly:
• Do not pull on the cable.
• Do not allow the sensor to dangle from the cable.
• Do not overtighten the mounting screw or mounting clip.
• Please adhere to a permitted bend radius of the cable (
☞
ca-
taolg).
• Avoid contact of the proximity switches with hard objects and
with chemicals, in particular nitric acid, chromic acid and sul-
phuric acid.
7.3
7.3.1
www.comoso.com