SCHUNK ROTA TPS 125-26 K, Сборка и руководство по эксплуатации, Страница: 7 / 28

Basic safety notes
03.00|ROTA TPS-K, ROTA TPS-Z |en 7
Basic safety notes
Intended use
This product is intended for clamping workpieces on machine tools
and other suitable technical devices.
• The product may only be used within the scope of its technical
data, (

3, Page 16) .
• The product is intended for industrial and industry-oriented
use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
Not intended use
The power chuck for stationary use/application is not being used
as intended if, for example:
• It is used as a lathe chuck.
• It is used as a press, a punch, a chuck, a load-handling device or
as lifting equipment.
• It is used in working environments that are not permissible.
• Workpieces are not clamped properly, paying particular
attention to the clamping forces specified by the manufacturer.
• People work on machines or technical equipment that do not
comply with the EC Machinery Directive 2006/42/EC,
disregarding the applicable safety regulations.
• The technical data specified by the manufacturer for using the
chuck are exceeded.
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
2
2.1
2.2
2.3