Maintenance
03.00|ROTA TPS-K, ROTA TPS-Z |en
19
Thread for air connections
ROTA TPS 125
G1/8"
ROTA TPS 160
G1/4"
ROTA TPS 200
G1/4"
ROTA TPS 250
G1/4"
ROTA TPS 315
G1/4"
NOTICE
Always make sure the connections are tight, and protect the
pneumatic hoses from hot chips and falling parts by using a
suitable metal hose.
NOTICE
When actuating the clamping device (clamping or releasing), a
short pause for ventilation must be maintained between each
shifting operation. This ventilation pause must be at least 0.5
seconds, depending on the length of the hose. A 4/3 or 5/3-way
valve is recommended for this purpose (center position
depressurized).
Assembly of the TPS on the machine table
Adjustment grooves are provided on both locating surfaces of all
stationary, pneumatically operated power clamping units of type
ROTA TPS-K, which enable mounting on the work table by means
of T-nuts. The T-nuts must be made or ordered according to the
width of the groove of the table.
Corresponding devices must be made by the customer for types
ROTA TPS-Z which ensure secure mounting and enable adjustment
of the power chucks.
6.3