Basic safety notes
8
04.00|0889132_ROTA TB2 / ROTA TB2 LH |en
Basic safety notes
Improper handling, assembly and maintenance of this product may
result in risk to persons and equipment if this operating manual is
not observed. Report any failures and damage immediately and
repair without delay to keep the extent of the damage to a
minimum and prevent compromising the safety of the product.
Only original SCHUNK spare parts may be used.
CONFIRMATION
We hereby confirm that the components comply with the
relevant basic and proven safety principles of Annex A and C of
ISO 13849-2, taking into account the requirements of the
documentation. The parameters, limitations, ambient conditions,
characteristic values, etc. for proper operation are defined in the
operating manual.
Intended use
This product is intended for clamping workpieces on machine tools
and other suitable technical devices.
•
The product may only be used within the scope of its technical
data,
•
The product is intended for industrial and industry-oriented
use.
•
Appropriate use of the product includes compliance with all
instructions in this manual.
•
The maximum RPM of the chuck and the required clamping
force must be determined by the user for the respective
clamping task based on the applicable standards and technical
specifications of the manufacturer.
(See also “Calculations for clamping force and RPM” in the
chapter “Technical data”).
2
2.1
