SCHUNK PZV, Сборка и руководство по эксплуатации

Страница: 20 / 52

Assembly
20 10.00 | PZV | Assembly and Operating Manual | en | 389384
5. Screw the product to the machine/system,
}
5.2.1 [
/
20] .
✓
Insert cylindrical pin for centering.
✓
If necessary, use appropriate connection elements (adapter
plates).
✓
Observe requirements for the adapter
plate,
}
5.2.1 [
/
21] .
✓
Observe the maximal tightening torque, admissible screw-in
depth and, if necessary, strength class.
6. Secure the gripper fingers to the base jaws, } 5.2.1 [
/
20] .
✓
Use centering sleeves from the enclosed accessory pack.
7. If necessary, fit a pressure piece for spring-supported
positioning of the workpiece against a stop,
}
5.2.1.1 [
/
22] .
8. Connect the sensor, see assembly and operating manual of the
sensor.
9. Mount the sensor, } 5.3 [
/
24] .
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length Permissible unevenness
< 100 < 0.02
> 100 < 0.05