SCHUNK PSH 22 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 36

SCHUNK PSH 22 Скачать руководство пользователя страница 25

Assembly

10.00 | PSH | Assembly and operating manual | en | 389331

25

The sensors can be set to the following switching positions:

Position "Gripper open"or"Part gripped (I.D. gripping)":

Ø

Bring product in the position in which it is to be set.

Ø

Loosen screw (8), so that the control cam 1 (9) can be moved in
the bracket (7).

Ø

Slide the control cam 1 (9) to the free end of the bracket.

Ø

Push control cam 1 (9) back until the sensor 1 (1) switches.

Ø

Tighten screw (8), in order to fix the control cam in this position.

Ø

Bring product into the "Gripper open" or "Part gripped" position
and test the function.

Position "Gripper closed"or"Part gripped (O.D. gripping)":

Ø

Bring product in the position in which it is to be set.

Ø

Loosen screw (8), so that the control cam 2 (9) can be moved in
the bracket (7).

Ø

Slide the control cam 2 (9) to the free end of the bracket.

Ø

Push control cam 2 (9) back until the sensor 2 (2) switches.

Ø

Tighten screw (8), in order to fix the control cam in this position.

Ø

Bring product into the "Gripper closed" or "Part gripped"
position and test the function.

«
...
23
24
25
26
27
...
»

Содержание PSH 22





































Отзывы:

Нет отзывов