Assembly
22
08.00|PGB 64 - 125|en
Part gripped (O.D. gripping):
1 Clamp the part to be gripped.
2 Slide the magnetic switch 2 (2) into the groove (3) toward the
center of the gripper until it switches.
3 By tightening the set screw, fix the magnetic switch 2 (2) in
this position in the groove (3).
4 Open the gripper and close again to test the function.
Part gripped (I.D. gripping):
1 Clamp the part to be gripped.
2 Slide the magnetic switch 1 (1) into the groove (4) until it
comes into contact with the housing.
3 Slowly pull the magnetic switch 1 (1) back until it switches.
4 By tightening the set screw, fix the magnetic switch 1 (1) in
this position in the groove (4).
5 Close the gripper and open again to test the function.
www.comoso.com
