SCHUNK NSR-A 100, Сборка и руководство по эксплуатации

Страница: 54 / 68

Assembly
54
06.00 | NSR-A | Assembly and Operating Manual | en | 389722
Ø
Secure sensor (2) with nut (1) onto the adapter plate.
Ø
Secure sensor using counter nut (3).
Ø
Adjust sensor, see Sensor Assembly and Operating Manual.
Ø
Query "pallet adapter present" position and test functionality.
5.8 Connection and disconnection of transport loads
The following must be taken into account during automated
connection and disconnection of transport loads:
• Approach the coupling interface between changeover head and
clamping pin in the pallet adapter in advance with no tilt angle
and eccentricity.
• Check that the traverse path is collision-free through the entire
machining area.
• Work at a reduced travel speed when loading.
• Ensure a correctly aligned traverse path for connecting and
disconnecting the clamping pallet.
• The loading handling should have overload protection.
• The operating conditions of the clamping station and the pallet
changing system must be monitored with suitable sensors to
help prevent collisions and incorrect controlling.