Basic safety notes
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
11
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
•
Structural changes should only be made with the written
approval of SCHUNK.
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
•
Use only original spare parts or spares authorized by SCHUNK.
Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
•
Make sure that the product is used only in the context of its
defined application parameters,
•
Make sure that the contact surfaces of the interface are always
clean.
•
Always ensure that no chips of any kind enter the interface.
Personnel qualification
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
•
All work may only be performed by qualified personnel.
•
Before working with the product, the personnel must have read
and understood the complete assembly and operating manual.
•
Observe the national safety regulations and rules and general
safety instructions.
2.3
2.4
2.5
2.6
