SCHUNK MPG 16, Сборка и руководство по эксплуатации

Страница: 26 / 48

Assembly
26
09.00 | MPG | Assembly and Operating Manual | en | 389213
5.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and Overview of sensors [
}
26].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.3.1 Overview of sensors
Designation MPG
16 20 25 32 40 50 64 80
Inductive proximity
switch IN 30 X – – – – – – –
Inductive proximity
switch IN 5 – – X X X X X X
Inductive proximity
switch IN 40 – X X X X X X X
Flexible position sensor
FPS – special housing
version
X X X X
Optical distance sensor
OAS – – X X X X X –
5.3.2 Mounting the inductive proximity switch IN 5
Mounting kit
To use the inductive sensor, the gripper has to be retrofitted with
a special mounting kit. This mounting kit is available from SCHUNK
for the models below.
Note: The assembly of the mounting set is different for products
up to construction year 12/2015 and from construction year
01/2016.