Assembly
16
04.00 | LOG | Assembly and Operating Manual | en | 389509
4 Assembly
4.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Mounting
The product can be mounted in a threaded hole or a through-hole
with a corresponding counter nut.
SCHUNK recommends a 1 mm larger through-hole for mounting
the gauge block to be able to align the gripper.
Assembly options
1
Mounting with threaded hole
2
Mounting with through-hole and nut
(preferred variant for gauge block mounting)
Mounting thread
Designation
LOG
20 – 25
26 – 63
64 – 99
Mounting thread on the
product
M14 x 1.5
M16 x 1
M20 x 1.5
Length [mm]
17
