Maintenance and repair work
changing the motor housing
7.3.1 Uninstalling the motor housing
1. Disassemble the protective conductor and motor cable.
2. Remove the screws (1) and the spacer (4).
3. Using lifting screws M6x35 ISO4762 (2), lift the motor housing
(3) to bridge the magnetic force.
4. Completely remove the motor housing (3).
7.3.2 Installing the motor housing
1. Fit the lifting screws (2). (Let them protrude 5 mm)
2. Place the motor housing (3) on the guide rail.
3. Slowly unscrew the lifting screws (2) one by one and set the
motor housing onto the guided slide (6).
4. Fit the 4 screws (1).
5. mount the spacer (4) and screw tight the power connector
6. Connect the protective conductor.
7. Connect the motor cable.
101
06.00 | LDL | Assembly and Operation Manual | en | GAS341441
Содержание LDL-UL-0200
Страница 1: ...Translation of the Original Manual Assembly and Operation Manual LDL Linear motor shaft...
Страница 59: ......
