_________________________________________________________________________________________
schunk.com
XND.00019.003_A – 10/2018
26
3.1.2
Multiple vice with adjustable jaws, H=165
For better accessibility to the workpiece to be
clamped it is also possible to position and fix
the higher adjustable jaws (H=165 mm) on the
clamping rail instead of the normal adjustable
jaws. In this case, no fixed jaw is needed but at
least two H=165 mm adjustable jaws are
necessary, with one of them being used as a
fixed jaw.
The H=165 mm adjustable jaws are fitted with suitable clamping jaws in the same way as the
normal adjustable jaws, depending on the application:
Pull-down jaw "grip"
Parallel clamping jaw
Pendulum jaw "grip"
The workpiece is clamped from above via the slanted clamping jaw, using an M10 clamping
screw.
The horizontal stroke of the clamping jaw is between 3.7 and 4.8 mm, depending on the
type.
