SCHUNK HLM 100, Сборка и руководство по эксплуатации

Страница: 19 / 36

Assembly and Installation
02.00 | HLM | Assembly and operating manual | en | 389497
19
Item 25 50 100 200
A
(*)
M5 M5 M5 G1/8"
B M5 M5 M5 G1/8"
4.3 Setting the speed
NOTICE
Risk of damage to the product!
If the end position is approached too hard, the product may be
damaged.
•
Adjust exhaust throttle valve and shock absorber so that the
movement is braked smoothly.
Ø
Close exhaust throttle valve completely.
Ø
Open exhaust throttle valve until the product starts to move.
Ø
Continue to open the exhaust throttle valve incrementally until
the movement decelerates smoothly.
✓
If the speed is too low, the product will brake too soon and
the end position will be reached too slowly.
✓
If the speed is too high, the product will impact against the
end position and the shock absorber will be overloaded.
NOTE
A smooth motion may also be too slow in many use-cases.
Further settings can be made via the shock absorbers,
Adjustment
of the shock absorber strocke [
}
20].