SCHUNK EOA-UR3510-SHA-050-E08-000, Сборка и руководство по эксплуатации

Страница: 32 / 52

Basic safety notes
6 02.00|Ident-Nr. 1334788, 1334789|en
Basic safety notes
Intended use
• The manual change system SHS, consisting of a manual change
head SHK and a SHA manual change adapter, is used to quickly
change parts and automation components, eg grippers on a
robot.
• The manual change system SHS is not part of the load
• The manual change head SHK ist mountecd on an industrial
robot. The manual change adapter SHA is mounted on an en
effector.
• SHA and SHK are connected by a quick-closing system.
• For use in roofed and enclosed rooms
• For use in non explosion-endangered rooms
• Exclusively transit air and vakuum. Corrosive and combustible
gases are not permitted
• The product may only be used within the scope of its technical
data,
(

3, Page 15) .
• The product is intended for industrial and industry-oriented
use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
Not intended use
The following points are considered as misconduct:
• Mounting the quick-change system (SHS) on products which
are not industrial robots
• Use of tools on SHS
• Use the SHS as a lifting device
• Exceeding the permissible speed
• Failure to comply with the technical data
• Weight of the end effectors is greater than the maximum
payload per size
• Improper connection between SHK and SHA
• Outdoor use
2
2.1
Operating conditions
2.2