Maintenance
22
06.00 | RM-W | Assembly and Operating Manual | en | 389388
7 Maintenance
7.1 Shock absorber
NOTICE
Serious mechanical damage due to failure of the shock
absorbers.
The shock absorbers have a limited service life span. A shock
absorber failure can lead to serious mechanical damage; for this
reason, they must be checked regularly for proper function. The
shock absorber is working correctly if the device reaches its end
position swiftly without any mechanical impact.
Overloading of the unit or exceeding the permitted swivel speed
can lead to drastic reduction of the service life.
•
Determine the swiveling times and the permitted stroke
frequency with "Gemotec Toolbox".
•
Regularly check the shock absorber.
•
Observe the recommended maintenance intervals.
7.2 Maintenance interval
NOTICE
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Interval [Mio. cycles]
2
7.3 Lubricants/Lubrication points (basic lubrication)
• All module bearings are life-time lubricated and do not need to
be re-lubricated.
• When disassembling the module for repairs, all bearings have to
be cleaned and re-lubricated.
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Greasing areas, grease
Lubricant point
Lubricant
Rolling element and sliding
surfaces of the bearings *
Isoflex-Topas NCA 52
(from Klüber)
* Only after disassembling the module for repairs
