SCHUNK ELB 70-H075, Сборка и руководство по эксплуатации

Страница: 97 / 108

Assembly
05.00 | ELB | Montage- und Betriebsanleitung | en | GAS 376437
95
Ø
Fasten the fastening bracket (3) to the housing (7) with two
screws (8). Only tighten screws slightly, so that the fastening
bracket (3) can still move.
Ø
Secure angular compensation (5) on the mounting plate (4)
using screw (10).
Ø
Secure mounting plate (4) to the adapter plate (6) with
screws (9). Only tighten screws slightly, so that the mounting
plate (4) can still move.
Ø
Screw the angular compensation counter nut (5) on as far as the
end of the thread.
Ø
Insert the shaft (2) into the brake (1). The mounting thread in
the shaft (2) must point in the same direction as the mounting
thread of the brake (1).
Ø
Fasten the brake (1) with the shaft (2) on the fastening
bracket (3) using screws (11). Tighten screws only slightly.
Ø
Screw angular compensation (5) into the shaft (2) and secure
with counter nut.
Ø
Align the fastening bracket (3) and mounting plate (4) so they
are flush and parallel to the guide. Tighten the screws (8).
Ø
Connect the brake (1) and energize it.
Ø
Unscrew the transport lock, see brake operating manual.
Ø
Power down the brake (1), thereby tensioning it (centering).
Ø
Tighten the screws (11).