10
16. MOVING AND STORAGE INSTRUCTIONS
16.1
Store the charger unplugged, in an upright position. The cord will still conduct electricity
until it is unplugged from the outlet.
16.2
Store inside, in a cool, dry place.
16.3
Do not store the connectors clipped together, on or around metal, or clipped to cables.
16.4
If the charger is moved around the shop or transported to another location, take care to
avoid/prevent damage to the cords, connectors and charger. Failure to do so could result
in personal injury or property damage.
17. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
Battery connectors do
not spark when touched
together.
The charger is equipped with an
auto-start feature. It will not supply
current to the battery connectors
until a battery is properly connected.
The connectors will not spark if
touched together.
No problem; this is a normal
condition.
The charger will not turn on
when properly connected.
AC outlet is dead.
Poor electrical connection.
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and extension
FRUGIRUORRVH¿WWLQJSOXJ
Green LED is lit and the
display shows
ANALYZING
BATTERY
.
The charger needs to check the
condition of the battery.
The green LED will be lit when the
charger is checking the condition of
the battery. This is normal.
*UHHQ/('LVÀDVKLQJDQG
the display shows
CHARGE
ABORTED-BAD BATTERY
.
The battery is too large for the
charger.
The battery voltage is still below
10V after 2 hours of charging.
You need a charger with a higher
amp rate.
Have the battery checked.
The display shows
CONNECT CLAMPS
.
The clamps are not making a good
connection.
The fuse is bad.
Check for poor connection at
battery and frame.
Replace the in-line fuse for the ring
connector.
18. SPECIFICATIONS
Input .................................................................................................. 230V AC~50Hz, 0.6A
Output ................................................................................................................. 12V 3A
Charging voltage ................................................................................................14.2-14.4V
'LPH[:['
...........................................................194 mm x 89 mm x 83 mm
Weight ..................................................................................................................... 0.78 kg
Output protection .......................................................................................................... Yes
Reverse polarity protection, spark/arc-proof ................................................................. Yes
Ingress Protection rating ..............................................................................................IP64
19. REPLACEMENT PARTS
Battery clamps (quick-connect)....................................................................... 3899002636
Ring connectors (quick-connect) ................................................................... 2299002042
