•
5
•
FEATURES
9.
Jump Start/USB On/Off Switch
1.
USB Port
2.
Built-In work Light
3.
Digital Display
4.
Display Button
5.
work Light On/Off Switch
6.
Inverter On/Off Switch
7.
12 volt DC Outlets
8.
120 volt AC Outlets
9.
Compressor hose
10.
Compressor gauge
11.
Compressor On/Off Switch
12.
Inflator Port
13.
Charger Plug
14.
wall Charger
15.
Battery Clamps
16.
Deflator Port
17.
Adapters
18.
Male to Male Adapter
19.
Inflator Hose
20.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
20
19
16
CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER™
10.
IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND
EVERY 30 DAYS TO KEEP THE INSTANT POWER™ INTERNAL BATTERY FULLY
CHARGED.
Check the internal battery’s charge level by pressing the Display Button. The Digital
10.1
Display will show the battery’s percent of charge. Charge the internal battery if the
display shows it is under 100%
NOTE:
Internal battery’s percent of charge is most accurate when the Instant Power™
has been disconnected from all devices and charging sources for a few hours.
Charging the Internal Battery using the Included Wall Charger.
10.2
To charge, plug the included wall charger into the charger plug on the back of the
1.
Instant Power™.
Plug the wall charger into a 120v electrical wall outlet.
2.
While the Instant Power™ is charging, the battery’s percentage of charge will be
3.
displayed. when the internal battery is fully charged, the display will show 100.
Complete charging may take up to 72 hours. The Instant Power™ is then ready to
use.
The charger will automatically go into maintain mode and maintain the battery at full
4.
charge without damaging it.
