• 13 •
14. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Battery ring
terminals do not
spark when touched
together.
The charger is equipped with
an auto-start feature. It will not
supply current to the battery
ring terminals until a battery
is properly connected. The
ring terminals will not spark if
touched together.
No problem; this is a normal
condition.
Both LEDs come on
for 2 seconds, then
turn off.
The charger is plugged into an
AC outlet.
No problem; this is normal.
The charger will
not turn on when
properly connected.
AC outlet is dead.
Poor electrical connection.
Bad battery.
Check for open fuse or
circuit breaker supplying
AC outlet.
Check power cord and
extension cord for loose
fitting plug.
Have battery checked.
I cannot select a 6V
or 12V setting.
The charger is equipped with
Auto Voltage Detection, which
automatically detects the voltage
and charges the battery.
No problem; this is normal.
15. BEFORE RETURNING FOR REPAIRS
If these solutions do not eliminate the problem, or for more information
about troubleshooting, contact customer service for assistance:
www.batterychargers.com
or call 1-800-621-5485
For
REPAIR OR RETURN
, contact Customer Service at 1-800-621-5485.
DO NOT
SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION (RMA)
number from Customer Service at Schumacher Electric Corporation.
