EN
17
PRE STATION
Loosen the safety screws and remove the protective cover.
Clean the rail and the protective cover with PRETREATcleaner
and a cloth. After cleaning, put the protective cover back on
and tighten the safety screws. You will find another rail below
of the Pretreatstation. This must also be cleaned.
All cleaned rails must be greased monthly. Use a water-repel-
lent grease for this purpose.
Press the „SETTINGS“ button on the display. Under „PUMP
CLEANING“, execute the „EXECUTE“ command. Follow the
steps shown on the display exactly. (TIP: Check in advance
that there is enough water and precoating in the tank con-
tainers).
Switch off the fan! Open the container and remove the indi-
vidual honeycomb elements. Clean them under water and
empty the container.
Rail cleaning
Rail grease
Pump cleaning
Separator cleaning
W
W
W
M
I
I
I
III
III
III
II
II
II
IV
IV
IV
