Schulze PRETREATmaker 5, Инструкция по эксплуатации

Страница: 25 / 52

3. 2 Spray settings
2. To set the length of the applied precoating, press the field "length" (picture 2). With the butttons "+" and "-" select the printing area (picture 3).
1. To set the width of the applied precoating, switch on or off nozzle 1,2,3,4 or 5 (picture 1) .
3. To set the start of printing, press the field "start" (picture 4) . With "+" and "-" select the beginning of the printing area (picture 5).
4. The printing area can also be set by switching individual zones on or off (picture 6).
3. 3 Carriage speed settings
To change the speed of the carriage, click on the "Speed" field (picture 1) < This function is only active when the spray mode is set to „standard” >
Adjust the carriage speed as required (picture 2) and save the new settings (picture 3). By increasing the speed of the carriage the amount of
precoating applied will decrease and by decreasing the speed of the carriage the amount of primer applied will increase.
Version 2 2 .0 1
E
N
G
L
IS
H
25
7 8 9
1
4
2
5
3
6
1 2
3
10 11