Schulze Big-O-Matic 90130, Инструкция по эксплуатации, Страница: 6 / 17

2.4 Initiation of the heat press
The press should only be used by trained personal after notice of this manual. Before the initial start up make sure that the power outlet is
in the right condition and that the grounding is connected to the power outlet.
The press can be turned on with the big dip-switch
(photo 1) . The display will now show the current temperature of the heating plate.
While powering up the press, the movable part has to be in the lower position, which means that the press has to be open. The press
also has to be open while heating up. Connect the compressed air. Start the press with both green buttons START
(photo 2) . If the press
does not reacts, please remove the compressed air connection.
After finishing the work with the press the dip-switch has to be turned off and the plug has to be pulled out.
Version 17.01
6/17